Assignment 5: Combination Prints, Chine Colle and Further Experiments

26/10/17

Assignment 5: Combination Prints, Chine Colle and Further Experiments

Task 1 (Project 13)

Present three combination mono and linoprints. These may be printed on different types of paper and in different colour schemes.

Learning Log notes under above link.

Series of combined mono and linocut prints - 2 of 9

Series of combined mono and linocut prints – 2 of 9

 

Series of combined mono and linocut prints - 5 of 9

Series of combined mono and linocut prints – 5 of 9

Series of combined mono and linocut prints - 8 of 9

Series of combined mono and linocut prints – 8 of 9

 

Task 2 (Project 14)

Present a series of prints which incorporate chine colle techniques. They will include a variety of thin papers, metal foil and other materials. The prints will be in different colour schemes and printed on different types of paper.

Series of Four Prints

Series of Four Prints

Supporting drawings and themes can be seen in the above Learning Log link.

Task 3 (Project 15)

Present your final print series. The prints should demonstrate your choice of techniqe and materials to express your creative ideas. They may include chine colle techniques, combination methods and a range of contrasting colours, expressive marks and papers. Include your supporting statement describing your choices and impressions of your series.

Final Combination Print - Vladimir Putin

Final Combination Print – Vladimir Putin

 

Final Combination Print - Angela Merkel

Final Combination Print – Angela Merkel

 

Final Combination Print - Kim Jung-Un

Final Combination Print – Kim Jung-Un

 

Final Combination Print - Donald Trump

Final Combination Print – Donald Trump

Development work contained with the above Learning Log link.

Attached to download is my supporting statement for Project 15 including reasons for the choice of theme, processes and techniques used, challenges encountered, my opinion of the results and lessons learnt from the course. A hard copy is being submitted with physical prints.

Supporting Statement Project 15

Reflection Against Assessment Criteria

Demonstration of Technical and Visual Skills

There is an awful lot to learn in this Introduction to Printmaking and I know it only scratches the surface. I feel that my design and compositional skills are just beginning to gel in this genre, strangely I think my more abstract and experimental attempts are more successful. I say strangely, because I think I am competent at drawing, however, the more representational I try to be with my concepts, the less successful my design can be. These last two projects are so much better than Project 13, in fact I’d pushed it out of my mind and couldn’t even remember what it was until I looked again. Something I alluded to in my supporting statement is, that I have a tendency to over think the planning stage and I found taking it a step at a time and dealing with the results of the previous step was much more liberating – I had an idea of the final image but allowed myself to let it evolve and develop more organically.

Quality of Outcome

I think the presentation of my work is coherent, I had planned to the nth degree so it had to be. However, I struggled with the registration aspect of the presentation and often over-complicated things and made the process harder for myself. The final project, although I was under pressure due to time constraints and only being able to produce those four prints, I found it easier to develop the images and the care taken greatly increased the outcome.

Demonstration of Creativity

I definitely think my personal voice is developing – who knew I was so political? It was a struggle to convert passions to creativity at times, Project 13 is a good example of that. Ideas were pretty clear but my representation of those ideas were lacking. In Project 14, allowing myself to go down a more abstract road, helped enormously, it was a relief to go back to “I wonder what will happen if I do this? Or that?” Because of this, I think the prints were more creative and consequently, the creativity flowed a lot more for the more representational concept of the portraits in Project 15. In Project 15, although the general image was in my head all along, I was still pleasantly surprised by the result. As mentioned in the Supporting Statement, the series has the appearance of old fashioned propaganda posters, so they are now my propaganda posters.

Context

The required research was so valuable for this section. I was actually scared of attempting the chine colle, I just could not get my head round it. Now I think, especially where I combined my miniature paintings as collage, it is my favourite technique combined with linoprints. I don’t think I realised at the time of Project 15, that I performed a lot of research for my subjects, although an ample pinch of salt was probably required. It helped inform my designs though combining what I found out online and what I was seeing and hearing on the news. I have enjoyed referring back to my perceptions and opinions and trying to explain them in a visual way, that is also, hopefully, engaging to look at.  This has been a tough course for me technically but absolutely 100% enjoyable and valuable. I can see taking various aspects forward into my Painting degree pathway.

 

Project 12: Collatype Collage Prints

Project 12: Collatype Collage Prints

09/05-20/06/17

For this project you will be working towards a series of representational images.

Over the time my previous assignment was in transit and with my tutor for feedback, I began thinking about what subject I would like to tackle for this project. Many things were in the news at the time not least the effects of climate change and the continual, nonsensical 140 character ramblings of the new president of America.  This one particular morning, the two collided once again, and the short-sighted lust for dollars over having a sustainable planet for the future of humankind hit the headlines. I had my subject.

I had an initial image in my head of a corporate “suit” lugging a sack of coal (much like the coal men of my rural youth – who used to deliver to our house every month), through a devastated landscape. The value of the coal far outweighing the value of his surroundings in his perception.

This is how I began to thrash out my ideas in my sketchbook. I explored variations on this theme, morphing the dollar sign, using little, round, suited businessmen, adding text etc and kept coming back to this one man who has the audacity to abuse his dubiously acquired power.  It became clear that one image would not sufficiently describe where I was heading. I had a rough vision of the decimated landscape, however, I had to bring “him” in to it too! I started researching and put out a Google search for “smug images of Donald Trump” and was presented with several pages full! As in the public domain, and as my final choice as source material did not have a photographer noted, I am unable to give him or her acknowledgement. I made a few sketches and realised that I needed to simplify the image considerably to have a chance of making it work as a collatype block. See sketchbook pages below:

Developing an idea for Project 12 Collatype print in sketchbook

Developing an idea for Project 12 Collatype print in sketchbook

Further development and notes for climate change image

Further development and notes for climate change image

The decision to create a series of three images to describe my theme - thumbnails and notes

The decision to create a series of three images to describe my theme – thumbnails and notes

 

 

 

 

 

 

Work on the simplification of the image and how to create the print blocks

Work on the simplification of the image and how to create the print blocks

How to create the blocks for my images and scale up to 24x32cm size

How to create the blocks for my images and scale up to 24x32cm size

For the second image - how the layers would look with portrait beneath the landscape

For the second image – how the layers would look with portrait beneath the landscape

 

 

 

 

 

 

 

Once I had the thumbnails finalised for my three images and had squared them up, I then had to enlarge the scale of each to 24x32cm ie four times the size of the thumbnails. Enlarging the images to this size on paper made it easier to see them in a simplified way and to consider the collage materials that may work from which to print.

The images were then traced and transferred to the same sized card with which I could make each print block. Once these were ready, I then returned to my sketchbook to explore the collage materials that would create the shapes, layers, textures and tones required. From working through each image in my sketchbook, I decided to have texture and tone evident in both the first (portrait) and third (landscape) print block, and due to the two layers, chose to use varying line thicknesses to create a cleaner effect in block 2. Using the test block created in Project 11 to guide my choices, I stuck my selections in my sketchbook. I was initially going to create a page per block, but I seemed to gain sufficient knowledge for each and could use similar materials for all of them, although I kept to different thread and strings for number 2. Once the collage of each block was complete, I fixed the reversed tracings on the wall, along with a pencil rubbing of the portrait as this was the trickiest to visualise. See below:

Enlarged drawing of image 1 - portrait

Enlarged drawing of image 1 – portrait

Enlarged drawing of image 2 - landscape layered over portrait

Enlarged drawing of image 2 – landscape layered over portrait

Enlarged drawing of image 3 - landscape of climate change

Enlarged drawing of image 3 – landscape of climate change

 

 

 

 

 

 

 

Exploring collage materials in sketchbook

Exploring collage materials in sketchbook

Pencil rubbing of collage materials that may be used

Pencil rubbing of collage materials that may be used

All three print blocks completed with collage

All three print blocks completed with collage

 

 

 

 

 

Print block 1 - Portrait with collage applied

Print block 1 – Portrait with collage applied

Print block 2 - Landscape layered over Portrait with collage applied

Print block 2 – Landscape layered over Portrait with collage applied

Print block 3 - Landscape of Climate Change with collage applied

Print block 3 – Landscape of Climate Change with collage applied

 

 

 

 

 

 

 

Reversed transfer tracings fixed to wall for reference

Reversed transfer tracings fixed to wall for reference

Reversed transfer tracings fixed to wall and sketchbook for reference

Reversed transfer tracings fixed to wall and sketchbook for reference

 

 

 

 

 

 

 

Once the print blocks were complete, I set about researching inking techniques to achieve the images I envisaged. I took my time here as I suspected this would be almost the most crucial element for success. The books I looked through are as below, along with my thoughts prior to printing my images:

Printmaking Handbook – Collagraphs and Mixed Media Printing by Brenda Harthill and Richard Clarke 
ISBN 978-0-7136-6396-9

I was interested in the blind printing or embossing techniques as one layer of print. This would add a 3D effect that may help delineate shapes – particularly for the portrait and combined images.

It was also noted how weak colour can enhance a sculptural effect. Some of these ideas can be tried out using newsprint first, although, I would imagine that thicker paper may be more successful for blind printing. In particular, for the third image in the series – the environment post climate change – would benefit from the rubbing of weak ink into the blocks – using blues/greens/grey-blacks for atmosphere and texture combinations.

Learning Linocut by Susan Yeates ISBN 978-0-7552-1330-6

Referencing particularly the inking techniques and tips on page 73 onwards.

Rainbow rolling – alluded to in the course materials also. this may be an additional method to add interest to the combined image (block 2). Considering using “blind printing” then overlaying with rainbow rolling. Other tips were dabbing much smaller areas with a cotton bud – also with homemade dabbers or scrim/muslin pads.

Results of experiments:

I experimented quickly with newsprint, taking a blind print of each block. They rendered unremarkable results, probably due to the thin paper which creased very easily. Using a swatch of the print paper I intended to use for two of the prints, one dry and one damp, I obtained better results. The best being with the dampened paper. Although I am not convinced that it will add anything to these particular images. Using the cartridge paper – the dry paper was nondescript, however, the dampened cartridge was much more successful, shower finer embossed details.

I had intended to use smooth, ivory Somerset printing paper for the middle image which will effectively be linear rather than tonal as it overlays two images. My thinking being  that the paper would add another element to the print. It also appears less processed and bleached – giving the impression of being environmentally friendly – as I have limited choice and I have never made my own paper before – it would have been nice to use recycled paper I made myself, maybe another time. For the other two more textured and tonal prints, I intend to use the cartridge paper which performed well in the experimental blind prints.

Inking of Blocks

I prepared my ink plate taking into consideration what I had learnt and researched, taking each block in order. I prepared trial swatches of colour mixes for each and kept them available for reference for each inking of the blocks. See photos below:

Swatches of blind print experiments with different papers

Swatches of blind print experiments with different papers

Colour palette for the portrait print

Colour palette for the portrait print

Colour palette the linear layered print

Colour palette the linear layered print

 

 

 

 

 

Colour palette the landscape print

Colour palette the landscape print

 

 

 

 

 

All printing paper had been soaked and blotted to achieve a damp surface for printing.

The specification of the colours to use were merely a starting point, and it became obvious that using a roller to apply the ink for both the portrait and the landscape were not an option. Instead, homemade ink dabbers, pieces of rag/muslin and cotton buds were used for adding and wiping away ink to help achieve depth, translucency and tone as required. Coincidentally, four prints were taken from each block, each of which were scrutinised and analysed to adjust the inking for the subsequent prints. It was noted, especially after the experiments with blind printing, just how much pressure was needed in specific areas to achieve a successful result. The outcome being, a print that was also embossed without a separate blind print. Only once did I re-register a print to add additional ink, that being the portrait (number 4 print I believe), this served to make me realise that doing this was a risk I didn’t want to take.

It was extremely hard work ensuring that the correct pressure was applied to each pull of the print and it did make me wonder if using a press with the softness of a “blanket” combined with a mechanical pressure would have been physically “easier” and more controllable. However, I did feel very connected to each result with the effort I had put into it.

Below are photographs of each print per block with associated self critique and notes taken at the time.

Portrait Image:

Portrait image - print 1

Print 1 – Improvements : work dark to light, hair needs more dark for depth, shadows more brown/black, top lip should be darker than bottom, more orange on the ear, more dark above collar and under eyebrows

Print 2 - Improvements: More yellow on hair and eyebrows, more orange on edge of face, ensure ink is pressed into lines, more dark on gauze around eyes, darken top lip, leave middle of lower lip white

Print 2 – Improvements: More yellow on hair and eyebrows, more orange on edge of face, ensure ink is pressed into lines, more dark on gauze around eyes, darken top lip, leave middle of lower lip white

Print 3 - Improvements: Need to balance the yellow of hair and brows with dark, some definition lost along with the smug expression, needs more pressure on printing

Print 3 – Improvements: Need to balance the yellow of hair and brows with dark, some definition lost along with the smug expression, needs more pressure on printing

Print 4 - Improvements: Expression and definition still allusive, second layer of printing had unsuccessful re-registration

Print 4 – Improvements: Expression and definition still allusive, second layer of printing had unsuccessful re-registration

 

 

 

 

 

 

 

 

 

 

 

 

Combined Image:.

Print 1 - Improvements: Felt the stripes of colour did not help to define the image, does it bring the two layers together too much? Consider using the mid blue for the portrait and the purple black for the landscape

Print 1 – Improvements: Felt the stripes of colour did not help to define the image, does it bring the two layers together too much? Consider using the mid blue for the portrait and the purple-black for the landscape

Print 2 - Improvements: not sure if this is saying what I want. It works ok but I feel it separates the images too much

Print 2 – Improvements: not sure if this is saying what I want. It works OK but I feel it separates the images too much

Print 3 - Improvements: using one dark colour, brings the images together but the registration has slipped blurring the lines, print again with more care

Print 3 – Improvements: using one dark colour, brings the images together but the registration has slipped blurring the lines, print again with more care

Print 4 - Improvements: All one dark colour, happy with print but need to decide which version works best for my intended series.

Print 4 – Improvements: All one dark colour, happy with print but need to decide which version works best for my intended series.

 

 

 

 

 

 

 

 

 

 

 

 

Climate Change Landscape:

Print 1 - Improvements: Happy with colours, more dark over the cloud texture, more consistent pressure when printing, ice caps need more ice blue as the texture describes the shapes, sea needs to a distinct colour from the foreground, trees need more solidity and definition to their edges - simplify, define with consistent pressure

Print 1 – Improvements: Happy with colours, more dark over the cloud texture, more consistent pressure when printing, ice caps need more ice blue as the texture describes the shapes, sea needs to a distinct colour from the foreground, trees need more solidity and definition to their edges – simplify, define with consistent pressure

Print 2 - Improvements: compared to print 1, the background is too dark, make paler and graduate dark down to foreground, here icecaps are more successful for being simpler, dark water line works in both, distant water is too dark and should mirror the sky, the foreground needs even more colour contrast to water

Print 2 – Improvements: compared to print 1, the background is too dark, make paler and graduate dark down to foreground, here icecaps are more successful for being simpler, dark water line works in both, distant water is too dark and should mirror the sky, the foreground needs even more colour contrast to water

Print 3 - Improvements: Very close, more solidity on the tree trunks achieved now need more in the foreground, try to obtain more variation in the sea colour/tone and definition around the ice caps again as in print 2

Print 3 – Improvements: Very close, more solidity on the tree trunks achieved now need more in the foreground, try to obtain more variation in the sea colour/tone and definition around the ice caps again as in print 2

Print 4 - I think I have achieved the best I can although the right hand tree is a little less defined, this does, however, give it a more rotted appearance

Print 4 – I think I have achieved the best I can although the right hand tree is a little less defined, this does, however, give it a more rotted appearance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

So, from these twelve prints I must choose the best from each set to complete my series of three. After completing all of these, they were hung on their drying line so that I could view them from a distance as a group. My choices will be explained and shown within my critical statement for Assignment 4.

 

Project 11: Making a Test Collage Block

Project 11: Making a Test Collage Block

19-26/04/17

To make your test collage block  you will be using a different material in each of the 16 sections you have marked out. 

My first challenge was to source PVA glue on the island – from the blank faces it was evident that this does not exist here. Luckily, during my abstract classes, we create collages as “sketchbook” work and we use a rough equivalent called Alkyd Sellador which is sold in DIY shops here. It is an acrylic sealant for walls etc but can be used neat as a glue or diluted and tinted as a glaze etc. It pretty much smells like PVA and is perfect for my purpose.

I have already collected many bits and bobs for collage although, I haven’t used many in anger as yet. I also noted that items such as pins and nails had been used in the course book example so went on the hunt for more everyday items to include.

Using a piece of mount board, (the natural wastage of the aperture centre from mounting paintings) as my block, I marked out 16 sections and covered it with Sellador. To make the sections obvious I placed strips of string to demarcate the borders. The items I decided to use as my textures were:

  1. Double stripped fabric trim
  2. Textured knitting yarn
  3. Wide gauge embroidery mesh
  4. Gauze bandage
  5. Ribbon
  6. Bubble wrap
  7. Netting from supermarket fruit
  8. Torn handmade paper with frayed edges
  9. Random buttons
  10. Dress making pins
  11. Strips of dried spaghetti
  12. Porridge oats
  13. Long grain rice
  14. Florists’ Winter Fauna
  15. Gardeners’ potting grit
  16. Broken egg shells

Once these were stuck down in the sections, I applied two coats of sealant (diluted Sellador) and left it to thoroughly dry.

I used heavy weight, hot pressed water-colour paper, torn to size, soaked and blotted as my print paper. Having already decided to try both relief and intaglio type printing from researching contemporary printmakers such as Ruth Barrett-Danes, I made two prints of each kind in both monotone and multi colour ways.

 

The first set of four prints, were taken with black oil based ink (Sakura Oil Printing Colour), two as a relief print and the other two with the block inked all over and wiping off most of the ink from raised collage.

 

The second set of prints was taken after cleaning off the most of the black ink, letting the remainder dry and then resealing. These prints were multi-coloured. The first was mainly different colours on each section with a couple having a mixture and was a combination of relief and intaglio. With the second, I reused the same block and ink but tried to unify the entire block by dabbing a dark blue wavy line of ink across all sections. The third print, again reused the previous inking with an additional lighter blue, but unfortunately, the paper moved during printing and a “double vision” effect occurred. With the fourth print, most of the previous ink was wiped off and then stripes of different colours were dabbed horizontally across the entire block to again unify the sections and return to a relief type print.

 

With the use of the same test block, many different looking prints have been produced by rollering, wiping, dab printing and using black and coloured inks in different ways. This has been a fun and informative exercise for future projects.  The hardest part for me, was having the patience to wait between layers of sealant and glue to dry but this was rewarded by the results. I am looking forward to more experimentation and applying what I have learnt to finished piece of work.

When it comes to submitting my assignment, I think I would choose the following two prints to put forward – at the moment!

The print where the block has a deeper covering of ink with it wiped off from the collage items appears to have more tone and depth and, to me, is more solid.

Second attempt at intaglio printing with the test block thoroughly inked and wiped - sharper print

Second attempt at intaglio printing with the test block thoroughly inked and wiped – sharper print

 

The coloured print, where each section is separated, is cleaner and has a mixture of relief and wiped methods, therefore, I think it shows more of the versatility of the process. It was a tough decision though, as I did like the attempts at unifying the sections with colour too.

Mix of relief and intaglio printing in multi colours from test block

Mix of relief and intaglio printing in multi colours from test block

 

Assignment 5: A Series of Paintings on a Theme

Assignment 5: A Series of Paintings on a Theme

08/01/16

My initial thoughts over the last few days have been to create a series of paintings of a similar subject, becoming progressively more abstract. I am unsure what the subject should be, although I am leaning to a more organic theme. That may be a natural still life, a figure or figures, or a landscape.

I am being influenced by other areas of art such as music and dance, and am gaining an understanding of evolving styles from the traditional and classical inspiring experimental interpretations to create something original.

26/01/16

Have been struggling to decide on a subject still:

Have now discounted still life and although was seriously tempted to use a figure, maybe a life model – it was not to be overly practical as my life classes are every 2 or 3 weeks and on a Saturday. I do have many life drawings for reference though and I have sifted through them, considering how I could elaborate on them. However, finally, I think I will use a landscape. I think this will give me more freedom to experiment. My thoughts regarding the series of paintings are still focused on progressively working from realism to abstract, how to do this is another choice to make. We are asked to make a series of 3-5 paintings so I could go from realism to impressionism to expressionism to abstract giving me 4 paintings. There are various ways I could attempt this, the mark making, the paint treatment, colour variation, distortion, changing balance in the image and many more I am sure.

Whilst I was away over Christmas and New Year I visited another attraction designed by the Canarian artist, Cesar Manrique. This was the Cactus Garden on Lanzarote. The garden itself is extraordinary, I felt I was moving between Africa, the Wild West, the tropics and deserts in relatively small area. The shapes of the cacti along with the natural volcanic made elaborate shapes with dramatic shadows in the early afternoon. There were also a few paintings by the artist on display which was timely, as they show how he used splatters and splashes to recreate the “spikeyness” of the plants.

Although the paintings are behind glass and it was difficult to avoid reflections, the techniques used can still be seen. Something to bear in mind.

Now I’m almost certain to use landscape and natural forms, I need to decide which scene to use, I think it is important to use the same scene throughout the series to fully appreciate the intended evolution of each style. Do I use sketches I already have or something completely new?

19-28/02/16

What a journey my musings over this assignment have travelled between the beginning of this post and now. It seemed that not a moment past when I wasn’t running through options and ideas, from waking up in the night to doing the ironing!  I have gone through this section’s exercises and experimented extensively which has informed my decisions on how to proceed. I have:

  • chosen my subject – a series of paintings of my local market town Fordingbridge
  • chosen my supports – canvas board 24×20″ – 3 of
  • given myself an option to add 2 smaller paintings if time allows
  • decided to explore a) the decline of the small market town, b) the picturesque façade or “first impression” c) the regeneration of the town in modern times

I had previously made some sketches of my intended picturesque scene in the Landscape section of this course. These were not used for a final painting at that stage, however, I had noted that I would like to revisit it at a later date – this seemed the perfect opportunity to do so.

My initial plans and a tracing of the map of Fordingbridge, as noted in my sketchbook, showed my first idea was to have a textured large-scale map as the ground for each painting. As the first one took all afternoon to create I decided that this would be impractical. In addition, as I had planned to use painting knives to make at least one of the series, the map would have been obliterated. Therefore, I decided to adapt my plan to use the map as a painting in its own right. This worked out well as I was struggling to create a coherent image for the regeneration painting. My sketchbook scribblings confirmed that this would be a forced image and would not say what I intended so I cut this from the series.

Sketchbook plan for the Fordingbridge series with revisions.

Sketchbook plan for the Fordingbridge series with revisions.

Map Painting

I made a larger, freehand drawing of the traced map from my sketchbook onto the first canvas board – this was to loosen up and not be a slave to the original ordinance survey map. I used string to denote the main A338 road in double width and other B roads with a single strand. For the Avon river that runs around and through the town, I used impasto gel in a textured fashion to represent flowing water. I also had some large gauge embroidery “canvas” which I cut into shapes to represent rows of buildings, which was added to the town. Once the PVA glue and gel was dry, I painted over with gesso to create a matt, uniform effect. I left this over night to dry and contemplate how I was going to move this forward. As I initially intended to use this as a ground for another painting, I had to let my ideas simmer and come to the boil. Whilst this was evolving in my head, I began plotting my plans for the next painting…

Returning to the map, with some half-baked notion of using thin acrylic washes, I added a watercolour ground over the gesso to enable some wet in wet washes. This again had to dry overnight. Again I returned to the other painting…

Maps should give an idea of the terrain of the land, so in order to achieve this, I added a wash of acrylic and laid cling film over the wet paint. Moving the film around created creases, this was left overnight again to dry. In the morning, I removed the cling film and a pale landscape of fields, tracks, streams etc was revealed.  I repeated the process to deepen the colour, and then added more washes of green, burnt sienna and ultramarine to build up the geographical features. I also added blue/sienna/green to the river to bring it forward. This was a long process and I continued to work on the other two large paintings in tandem. I also had to take my time to assess where I was going with this. Finally, I grazed over some oil pastels in places to bring out the relief of the raised features – this is where I left it as complete.

This was definitely an organically evolving painting – it wasn’t originally supposed to be one of the series but claimed its place. I think it works although, it does look tentative which is probably because that’s how I felt making it. It does give the series some introduction and it is subtle in the way that an introduction is not supposed to be the main event.

Final Painting Oil pastel in greys, blues, greens and browns to bring out the relief of the texture

Final Painting 24×20″ Acrylic and Mixed Media on Canvas Board
Oil pastel in greys, blues, greens and browns to bring out the relief of the texture

Decline of a Market Town

This is actually an idea I’ve had bubbling around my brain for some time, however, I wasn’t entirely sure how to execute it.  I had spent a very cold but sunny afternoon wandering around Fordingbridge taking photographs of anything that caught my eye. It was a sad reflection of how many closed shop fronts were evident, those that had been re-used were for charity shops, estate agents (ironically) and new clinics for various ailments! Fordingbridge is not a complete ghost town, it does have top quality family run shops such as bakers, butchers, seven hairdressers/barbers (!), a little exclusive boutique and a few shabby chic home-ware shops plus your obligatory mini-supermarkets and post office, a couple of banks – recently reduced by three. It did strike me that two of the most well-kept frontages were funeral directors – it seemed I should include at least one of these in my painting to make a point. Instead of creating a high street of boarded up windows, I decided to create collage of shop fronts albeit painted. I experimented in my sketchbook and added crumpled tissue over the painting with succeeded in giving the image a run down, abandoned effect which I liked and decided to use. I set out to paint pretty much straight onto the board and concentrate on perspective and tone rather that a perfect rendition of the subject – this also helped with the neglected effect I was after.

This was a departure from my usual carefully planned composition, in fact, again the composition evolved. I was really pleased with the experiment in the sketchbook but am not sure if the final work has that same sense of abandonment – should I have done less shop fronts? One thing I am unsure about is whether I should have put washes over the tissue – looking back at the sketchbook, I think I did there.

Decline of a Market Town Final painting

Decline of a Market Town 24×20″ Acrylic and Mixed Media on Canvas Board
Final painting

Picturesque Fordingbridge

My rough idea for this assignment was to produce this image in several differing techniques and styles. I decided not to do this as this is a complex subject and to be honest, I probably would have become bored with doing the same view several times in one week. As alluded to earlier, I had wanted to revisit this from the Landscape section previously. This time, however, I determined to produce a looser, more expressive painting instead of becoming embroiled in details. To achieve this and keep me true to my intent, I opted to use painting knives for the entire painting. The only brushes used were to lay down the bright red ground and a rigger brush to branches on the trees and some grasses and reeds in the foreground. I used a red ground to have some show through and give uniformity to the painting, however, most of it was obliterated with the amount and free use of paint.

This was great fun to do and real antidote to the other two large paintings. I literally scrubbed, scratched and smeared paint all over the place. I did adhere to one main rule though and that was ensuring the tones were working in all aspects of the painting. I think it works as when viewed from distance it looks right. This one helped inform my process on the small Down River painting by pushing me to avoid detail.

Picturesque Fordingbridge Final Painting

Picturesque Fordingbridge 24×20″ Acrylic on Canvas Board
Final Painting

Plan for small paintings and overall layout

Plan for small paintings and overall layout

 

After completing the three large paintings in the series, I was more determined to include the smaller two – I felt that their inclusion would give a fuller impression of the theme as a whole. I also wanted to give these a different treatment, yet still keeping them unified with the others by using the same palette of colours.

 

 

 

Town Hall Clock Tower

Whilst taking photographs of the Town Hall, I framed a composition of the various pitched roofs around the clock tower. Although it was only a quick snap, it was strong in my memory too and an idea was already forming. In fact, the memory was so acute, I didn’t recognise the photograph straight away as my basic composition was already set in my mind. I wanted to produce an abstracted version that was still recognisable, yet, could fool the eye.

I actually quite like this technique for abstracting a subject and I think this works in its own right, however, my doubt is whether I have done enough to integrate it into the series of work. I used the same palette although the colours are flat, maybe, just because it’s a series it doesn’t have to fit? I suppose that’s down to my objective. Although I have to admit my objective was to have the series work together and for each painting to work by itself.

Town Hall Clock Tower Final painting with revised colourway

Town Hall Clock Tower A4 Acrylic on Paper
Final painting with revised colour-way

 

Down River

The second small painting was pure indulgence, I stood for some time on the little bridge watching the offshoot stream from the river. It was sunny and cold, which made the light bounce of the trees and bushes beautifully. I was, as seems to be usual, drawn to the long shadows across the water and I chose to paint this just because I liked it! I made explicit notes to treat this simply when painting and although I started well, I began to fiddle with detail – so having a strong word with myself, I painted over the fiddles with flat brush marks and just about pulled it back.

 

I am pleased with the tonal treatment of this painting, and am getting better at keeping detail to a minimum. I never thought I was a detail person – yet I think I like to “tidy” up a little too much so I made myself stop before it looked too neat.

Down River Final painting

Down River A4 Acrylic on Paper
Final painting

Arrangement of the Series

I had a few ideas on arranging the paintings and although I didn’t commit to producing 5 paintings at the beginning until I knew I had enough time, most of the plans involved 5.

I considered putting the paintings together as if they were one large painting in a group, (see first sketchbook plan). After completing them all, I preferred them in a line and played around with the order. I was certain that the map should be in the centre so that the others radiating out from it. I also decided that I wanted to break up the urban/abstract with the landscape focussed paintings, so the final layout would be:

Self Evaluation

This last section of the PoP1 course has been very enlightening for me. Previously, I felt I lacked creativity, I was comfortable drawing or painting what I saw in front of me, yet I felt totally unoriginal. In fact I was starting to despair – any exercise that said to evoke mood and atmosphere, left me cold. I couldn’t get in the zone and any attempt looked forced. The different techniques here, although I was aware of them, made me lose my logical head and allowed me to just do. I enjoyed all the dribbling, splashing and pouring, absolutely loved using painting knives instead of brushes and the abstract exercises were a revelation. I felt I was being creative and artistic not just copying and reproducing. I absolutely understand that I need to learn all the usual drawing, tone, colour mixing, perspective etc but it’s been great to have that underpin such freedom. One small step…

 

Exercise: Preparing a Textured Ground

13 & 14/02/16

Exercise: Preparing a Textured Ground

Prepare one or two grounds in some of the ways suggested or use your own ingenuity to create textured grounds. Then prepare the whole surface with the appropriate primer.

When you come to devise your textured ground, you may find it helpful to have a title in your mind to help you select materials and effects. Think of your own or use one of these:

Urban Jungle  –   Rough Sea  –  Autumn  –  Ghost Town

I decided to use the suggested titles purely for speed and convenience as my assignment deadline is looming over me and I’d like to put my time into experimentation at this stage.

Preparing a Textured Ground Selection process for subject of a painting

Preparing a Textured Ground
Selection process for subject of a painting

After reviewing the thumbnails and going through the process I decided to go for the title Rough Sea. I prepared some acrylic paper with gesso mixed with impasto paste and attempted to put in the texture of rocks, waves and sky. However, I was unprepared for the amount of time it would take for this to dry – considering how cold and damp it has been and my studio space is in the summerhouse at the end of the garden – I had to leave it overnight. In the meantime I began the next exercise “Mixing Materials into Paint”.

So next day, I returned to the textured ground much more informed by the leaping ahead and experimenting with adding in other materials. The following gallery shows the progress of this exercise – materials used were tissue paper, fruit netting and handmade paper stuck down with PVA glue. I have to admit that I missed the instruction of using a primer over these before painting, however, as I was using acrylic paint, hopefully nothing untoward will happen.

I decided to play with the perspective slightly as the painting progressed.  There is a feeling of looking down onto a beach from cliffs, yet the sea is being thrown up as high as the cliffs.

The final painting enlarged to show the texture.

Adding colour, deeper tones and more mood

Adding colour, deeper tones and more mood

 

Assignment 5 Drawing Outdoors – Media Experimentation and Selection

17 & 18/11/14

Assignment 5 Drawing Outdoors – Media Experimentation and Selection

In my mind I wanted to use water based media to produce washes particularly with wet in wet effects. The following experiments were mainly focussed on the woodland in the middle ground of my composition and which colours to use for what.  I was also keen to try out salt effects both with sea salt and table salt to disperse the ink and watercolour to produce texture. I’ve taken some work in progress photos to show how the layers were built up.

Colour media experiments with notes

Colour media experiments with notes

A mixture of watercolour, acrylic ink and oil pastels.

Sketchbook page showing the colours I intended to use following the colour studies. Also, the adding texture with screwed up tissue and hand-made paper,
A mixture of watercolour, acrylic ink and oil pastels.

 

From the above studies and playing around with colours and media, I made a rough plan in my sketch book of the colours of ink and watercolour I wanted to use.  I had seen some mixed media work using tissue paper as a textured base so thought I’d try this, plus I had some hand-made paper that was very absorbent and frayed freely at a torn edge. Texture is a key part of this drawing so I also wanted to try using salt  sprinkled onto wet media and see how it reacted, I used large grain sea salt and fine grain table salt.  I imagined that the larger grain would be useful to describe the moss on the

Further experimentation with textures using: Oil pastel as a resist Salt to diffuse pigment Hand-made paper to use wet in wet pigment.

Further experimentation with textures using:
Oil pastel as a resist
Salt to diffuse pigment
Hand-made paper to use wet in wet pigment.

concrete and the finer grain would give a diffused effect to show rough texture.  I could, of course,

have used rough watercolour paper to show this, However, I made a conscious decision to use smooth hot pressed paper as I can add roughness but not take it away and be more selective in where this was done.