Project 11: Making a Test Collage Block

Project 11: Making a Test Collage Block

19-26/04/17

To make your test collage block  you will be using a different material in each of the 16 sections you have marked out. 

My first challenge was to source PVA glue on the island – from the blank faces it was evident that this does not exist here. Luckily, during my abstract classes, we create collages as “sketchbook” work and we use a rough equivalent called Alkyd Sellador which is sold in DIY shops here. It is an acrylic sealant for walls etc but can be used neat as a glue or diluted and tinted as a glaze etc. It pretty much smells like PVA and is perfect for my purpose.

I have already collected many bits and bobs for collage although, I haven’t used many in anger as yet. I also noted that items such as pins and nails had been used in the course book example so went on the hunt for more everyday items to include.

Using a piece of mount board, (the natural wastage of the aperture centre from mounting paintings) as my block, I marked out 16 sections and covered it with Sellador. To make the sections obvious I placed strips of string to demarcate the borders. The items I decided to use as my textures were:

  1. Double stripped fabric trim
  2. Textured knitting yarn
  3. Wide gauge embroidery mesh
  4. Gauze bandage
  5. Ribbon
  6. Bubble wrap
  7. Netting from supermarket fruit
  8. Torn handmade paper with frayed edges
  9. Random buttons
  10. Dress making pins
  11. Strips of dried spaghetti
  12. Porridge oats
  13. Long grain rice
  14. Florists’ Winter Fauna
  15. Gardeners’ potting grit
  16. Broken egg shells

Once these were stuck down in the sections, I applied two coats of sealant (diluted Sellador) and left it to thoroughly dry.

I used heavy weight, hot pressed water-colour paper, torn to size, soaked and blotted as my print paper. Having already decided to try both relief and intaglio type printing from researching contemporary printmakers such as Ruth Barrett-Danes, I made two prints of each kind in both monotone and multi colour ways.

 

The first set of four prints, were taken with black oil based ink (Sakura Oil Printing Colour), two as a relief print and the other two with the block inked all over and wiping off most of the ink from raised collage.

 

The second set of prints was taken after cleaning off the most of the black ink, letting the remainder dry and then resealing. These prints were multi-coloured. The first was mainly different colours on each section with a couple having a mixture and was a combination of relief and intaglio. With the second, I reused the same block and ink but tried to unify the entire block by dabbing a dark blue wavy line of ink across all sections. The third print, again reused the previous inking with an additional lighter blue, but unfortunately, the paper moved during printing and a “double vision” effect occurred. With the fourth print, most of the previous ink was wiped off and then stripes of different colours were dabbed horizontally across the entire block to again unify the sections and return to a relief type print.

 

With the use of the same test block, many different looking prints have been produced by rollering, wiping, dab printing and using black and coloured inks in different ways. This has been a fun and informative exercise for future projects.  The hardest part for me, was having the patience to wait between layers of sealant and glue to dry but this was rewarded by the results. I am looking forward to more experimentation and applying what I have learnt to finished piece of work.

When it comes to submitting my assignment, I think I would choose the following two prints to put forward – at the moment!

The print where the block has a deeper covering of ink with it wiped off from the collage items appears to have more tone and depth and, to me, is more solid.

Second attempt at intaglio printing with the test block thoroughly inked and wiped - sharper print

Second attempt at intaglio printing with the test block thoroughly inked and wiped – sharper print

 

The coloured print, where each section is separated, is cleaner and has a mixture of relief and wiped methods, therefore, I think it shows more of the versatility of the process. It was a tough decision though, as I did like the attempts at unifying the sections with colour too.

Mix of relief and intaglio printing in multi colours from test block

Mix of relief and intaglio printing in multi colours from test block

 

Advertisements

One thought on “Project 11: Making a Test Collage Block

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s